Pannkoke Flachglastechnik GmbH - Logo

Cutting Technique
Pannkoke Flachglastechnik GmbH

cutting tilting table 490P with cutting machine 115-5d

Air cushion tilting table 490P with glass cutting machine 115-5d

The cutting table 490P/LFB/115-5d is designed for the manual cutting of glass sizes up to 2600 x 4600 mm and a glass thickness of maximum 8 mm.

This universal cutting, tilt and break-out table enables the rational and safe movement of all glass dimensions up to the maximum size from the vertical (storage position) to the horizontal (working position). This tilt movement works pneumatically. An air floatation cushion on the cutting, tilt and break-out table assures easy movement of the glass sheet in the horizontal position.

The cutting machine has a movable electric cutting head which can execute longitudinal or vertical cuts at will. For series production it is possible to increase the productivity of the machine enormously via four additional longitudinal cutting heads and the series stops.

The built-in pneumatic break-out bars enable a neat break-out of the executed cuts. The operation of the break-out bars works via the knee of the operator so that both hands free for guiding the glass sheet.

This cutting, tilt and break-out table 490P/LFB/115-5d is the economical solution for small and mid-sized factories.

Air cushion tilting table 490P - glass cutting machine 100-5D

Air cushion tilting table 490P with glass cutting machine 100-5d

The cutting table 490P/LFB/100-5d is designed for the manual cutting of glass sizes up to 2600 x 4600 mm and a glass thickness of maximum 8 mm.

This universal cutting, tilt and break-out table enables the rational and safe movement of all glass dimensions up to the maximum size from the vertical (storage position) to the horizontal (working position). This tilt movement works pneumatically. An air floatation cushion on the cutting, tilt and break-out table assures easy movement of the glass sheet in the horizontal position.

The cutting machine has a manually positioned cutting head that can perform longitudinal or transverse cuts, as required.For series production it is possible to increase the productivity of the machine enormously with series end stops.

The built-in pneumatic break-out bars enable a neat break-out of the executed cuts. The operation of the break-out bars works via the knee of the operator so that both hands free for guiding the glass sheet.

This cutting, tilt and break-out table 490P/LFB/100-5d  is the economical solution for small factories.

Air cushion tilting table 435G - glass cutting machine 100-5d

Air cushion tilting table 435G with glass cutting machine 100-5d

The 435G/100-5d is the economical solution for cutting flat glass in the glass processing company.

Float and figured glass sizes up to 2200 x 3210 mm can be cut manually with this cutting table. The manual tilt movement of the table top is supported by gas pressure springs. The digital measuring system prevents reading mistakes and offers a high reproducibility and permanence of dimension in comparison to cutting with glass cutter and ruler. The air cushion enables the easy movement of glass sheets up to 8 mm thickness. The cutting table 435G is also available without the cutting machine. The cutting machine 100-5d can be installed easily on any other Pannkoke cutting table.

Cutting Machine 115-5d

Cutting Machine 115-5d

The cutting machine 115-5d has a movable electric cutting head which can execute longitudinal or vertical cuts at will. The transverse cuts are performed by motor, while the longitudinal cuts are performed by manually pushing the cutting bridge.

For series production it is possible to increase the productivity of the machine enormously via four additional longitudinal cutting heads and the series stops.

For determining the exact position, the cutting machine 115-5 has two continuous measuring tapes for the position of the cutting head and of the cutting bridge. You work with absolute dimensions referenced to the glass zero point.

Manual Glass Cutting Machine 100-5d

Manual Glass Cutting Machine 100-5d

The cutting machine 100-5d has an electrically positionable cutting head that can execute longitudinal or transverse cuts, as required.The transverse cuts are performed by a hand crank drive, while the longitudinal cuts are performed by manually pushing the cutting bridge.

For determining the exact position, the cutting machine 100-5d has two digital measuring displays for the position of the cutting head and of the cutting bridge. You can choose between cutting with absolute dimensions referenced to the glass zero point or cutting with incremental dimensions that are always referred to the last cut.

Loading table 428

Loading table 428

For the efficient cutting of flat glass with sizes up to 2200 x 3210 mm, you need a quick and reliable loading system in addition to a corresponding cutting machine.

These requirements are fulfilled by the loading table 428 which can be delivered in versions from manual to fully-automated. It is suitable for nearly every type of job and can be equipped with each Pannkoke cutting machine. With this loading and cutting table you have the possibility of economically managing float and figured glass cutting as well as cutting laminated safety glass. Together with a break-out table you get a space-saving cutting line which enables you, with a loading system such as our bay-carriage rack system, to load automatically up to six glass types.

Air cushion tilting table 490P

Air cushion tilting table 490P

The air cushion tilting table 490P/LFB is designed for the manual cutting of glass sizes up to 2600 x 4600 mm and a maximum glass thickness of 8 mm.

This universal cutting, tilt and break-out table enables the rational and safe movement of all glass dimensions up to the maximum size from the vertical (storage position) to the horizontal (working position). This tilt movement works pneumatically. An air floatation cushion on the cutting, tilt and break-out table assures easy movement of the glass sheet in the horizontal position.

All manual Pannkoke cutting machines can be combined with this air cushion tilting table 490P/LFB. This enables you to configure the optimum universal cutting, tilting  and break-out table for your requirements.

The built-in pneumatic break-out bars enable a neat break-out of the executed cuts. The operation of the break-out bars works via the knee of the operator so that both hands free for guiding the glass sheet.

This cutting, tilt and break-out table 490P/LFB/115-5 is the economical solution for small and mid-sized factories.

Air cushion tilting table 4900

Air cushion tilting table 4900

The air cushion tilting table 4900/LFB is designed for the manual cutting of glass sizes up to 3250 x 6000 mm and a maximum glass thickness of 19 mm. The air cushion tilting table 4900/LFB can, however, also be equipped with a Prince 3 or Prince 3M CNC cutting machine and is then suitable for automatic cutting of glass sizes up to 3250 x 6000 mm and a maximum glass thickness of 19 mm.

This universal cutting, tilt and break-out table enables the rational and safe movement of all glass dimensions up to the maximum size from the vertical (storage position) to the horizontal (working position). This tilt movement works pneumatically. An air floatation cushion on the cutting, tilt and break-out table assures easy movement of the glass sheet in the horizontal position.

All Pannkoke cutting machines can be combined with this air cushion tilting table 4900/LFB. This enables you to configure the optimum universal cutting, tilting  and break-out table for your requirements.

The built-in pneumatic break-out bars enable a neat break-out of the executed cuts. The operation of the break-out bars works via the knee of the operator so that both hands free for guiding the glass sheet.

This cutting, tilt and break-out table 4900 is the economical solution for small and mid-sized factories.

2-bridged cutting machine 215-MAN

2-bridged cutting machine 215-MAN

The manual 2-bridged cutting machine 215-MAN is designed for the series manual cutting of glass sizes up to 3240 x 2400 mm and a glass thickness of 2 to 12 mm.

This special cutting machine enables the efficient and safe series cutting of right angled glass sheets for glass grinding factories, suppliers of picture frame producers or the furniture industry.

The built-in air cushion guarantees an easy movement of the glass sheet in the horizontal position. The cutting machine has several longitudinal and vertical cutting heads. All longitudinal and vertical cuts are executed with only one movement of each cutting bridge. This speed cannot be attained by any NC-cutting machine.

The built-in pneumatic break-out bars enable a clean break-out of the executed cuts. The operation of the break-out bars works via the knee of the operator so that both hands are free for guiding the glass sheet.

The cutting machine 215-MAN is the economical solution for small and mid-sized factories with series cutting.