Battery-powered Vacuum Lifter Kombi 7011-AB for production and workshop

The Battery-powered Vacuum Lifter Kombi 7011-AB allows you to move loads of up to 1200 kg. The product range has versions suitable for carrying plate material with dimensions up to 6000 x 3000 mm. The outer suction cups are extendable. All you need otherwise is a crane or fork lift truck.

The special design of the suspension permits laying of, for example, glass plates, horizontally on a cutting table or lifting of them away from the table. The optionally available protective grating provides the operator with additional protection, e.g. against pieces of broken glass.

Additional supports guarantee the safe transport of freshly sealed insulation glass units. The height of the supports can be adjusted and they can be removed at any time if the Battery-powered Vacuum Lifting Device Kombi 7011-AB is required for other duties.

The Battery-powered Vacuum Lifter Kombi 7011-AB has a 1-circuit vacuum system.

If required, the Vacuum Lifting Device Kombi 7011-AB is also available with 2-circuit technology as the Vacuum Lifting Device 7211-AB. The Battery-powered Vacuum Lifter Kombi 7211-AB has two independent vacuum circuits. Each vacuum circuit is designed so that it can support the nominal load on its own, If one of the systems fails, or if there is a loss of power, you receive a warning.

The battery-powered vacuum pump does not require a power supply, so that the Battery-powered Vacuum Lifter Kombi 7011-AB can be used anywhere. Suction / release functions can also be implemented via a cordless remote control, which is especially recommended when transporting large dimension objects or when used with a forklift truck.

The modular design of the Battery-powered Vacuum Lifter Kombi 7011-AB means that the vacuum generator can be changed over from battery-powered to mains electricity drive or compressed air drive. The single circuit vacuum system can be replaced at any time with a twin circuit vacuum system. Upgrading to a Battery-powered Vacuum Lifter Kombi 7211-AB is, therefore, always possible.

The Battery-powered Vacuum Lifter Kombi 7011-AB is and remains, due to its modular construction, adaptable to your requirements.

We are talking about Battery-powered Vacuum Lifters or as others say Vacuum Lifting Devices, Suction Handles, Glass Suckers, Vacuum Suckers, Suction Lifters, Glass Lifters, Glass Suction Devices, Gazing Equipment or Glass Transportation Equipment. A Vacuum Lifter is a load bearing device (lifting equipment, hoist) with which airtight materials, such as glass, metal, plastic panels, can be transported or held without damaging the surface. An electrical vacuum pump generates the vacuum.

We speak of a Kombi, if the carrying frame with the vacuum suction cups is equipped with an electrical vacuum pump, thereby making up a complete Vacuum Lifting Device. A rechargeable battery is also accommodated in the carrying frame; the Vacuum Lifting Device is thus independent of any power supply source and can be used everywhere.

Such a Battery-powered Vacuum Lifter can be used immediately with a crane or a fork-lift truck.