Battery-powered Vacuum Lifter Kombi 7011-D43 SO01 for production and workshop

Lift, support and move using the Battery-powered Vacuum Lifter Kombi 7011-D43 SO01, e.g. for glass, metal plates, plastic plates, etc.
All you still need is a crane to move loads of up to 800 kg. The load can be turned through up to 300°. Turning is carried out manually.

The Battery-powered Vacuum Lifter Kombi 7011-D43 SO01 has a 1-circuit vacuum system.

If required, the Battery-powered Vacuum Lifter Kombi 7011-D43 SO01 is also available with 2-circuit technology as the 7211-D43 SO01. The Battery-powered Vacuum Lifter Kombi 7211-D43-SO01 has two independent vacuum circuits. Each vacuum circuit is designed so that it can support twice the nominal load on its own, If one of the systems fails, or if there is a loss of power, you receive a warning.

The suction cups are slidably mounted.

The battery-powered vacuum pump does not require a power supply, so that the Battery-powered Vakuum Lifter Kombi 7011-D43 SO01 can be used anywhere. Suction / release functions can optionally be implemented via a cordless remote control.

We are talking about Battery-powered Vacuum Lifters or as others say Vacuum Lifting Devices, Suction Handles, Glass Suckers, Vacuum Suckers, Suction Lifters, Glass Lifters, Glass Suction Devices, Gazing Equipment or Glass Transportation Equipment. A Vacuum Lifting Device is a load bearing device (lifting equipment, hoist) with which airtight materials, such as glass, metal, plastic panels, can be transported or held without damaging the surface. An electrical vacuum pump generates the vacuum.

We speak of a Kombi, if the carrying frame with the vacuum suction cups is equipped with an electrical vacuum pump, thereby making up a complete Vacuum Lifting Device. A rechargeable battery is also accommodated in the carrying frame; the Vacuum Lifting Device is thus independent of any power supply source and can be used everywhere.

Such a Battery-powered Vacuum Lifter can be used immediately with a crane or a fork-lift truck.