Battery-powered Vacuum Lifting Device Kombi 7211-DSG3 for construction site and workshop
Lift, hold and move using the Battery-powered Vacuum Lifting Device Kombi 7211-DSG3 convex and concave shaped materials, e.g. glass, metal plate, plastic plates etc.
Particularly geared to your requirements, this series can transport loads with a weight of up to 400 kg vertically.
The load can be turned through +/- 90 and or pivoted through 90 degrees. Turning and tilting are carried out manually. There are locking points every 15 degrees throughout the tilting range.
The Battery-powered Vacuum Lifting Device Kombi 7211-DSG3 has a 2-circuit vacuum system and was developed for construction site use in accordance with the safety standard EN 13155. Use of 2-circuit technology means that the Battery-powered Vacuum Lifting Kombi 7211-DSG3 has two independent vacuum circuits. Each vacuum circuit is designed so that it can support twice the nominal load on its own, If one of the systems fails, or if there is a loss of power, you receive a warning.
The suction cup rows are mounted in a rotatable manner, so that simple matching to the radius is possible. The minimum radius of the transported load is 2000 mm for this device.
The battery-powered vacuum pump does not require a power supply, so that the Battery-powered Vacuum Lifting Device Kombi 7211-DSG3 can be used anywhere.
The vacuum/release function can also be initiated by a wireless remote control, which is particularly recommendable when transporting larger dimensions or using a forklift.
This type of Vacuum Lifting Device can be used immediately with a crane or a fork-lift truck.