Battery-powered Vacuum Lifting Device Kombi 7211-CeDeG for construction site and workshop

With the Battery-powered Vacuum Lifting Device Kombi 7211-CeDeG you can move convex and concave shaped materials up to 600 kg, such as e.g. glass, sheet metals, plastic boards.

In the central position, you can turn the transported material through +/- 90°. Thus, the Battery-powered Vacuum Lifting Device Kombi 7211–CeDeG SO02 is optimised for glazing with large glass panes, which are to be set up on their edges.

The suction cup rows are mounted in a rotatable manner, so that simple matching to the radius is possible. The minimum radius of the transported load is 4000 mm for this device.

The Battery-powered Vacuum Lifting Device Kombi 7211-CeDeG has a 2-circuit vacuum system and was developed for construction site use in accordance with the safety standard EN 13155.

The battery-powered vacuum pump does not require a power supply, so that the Battery-powered Vacuum Lifting Device Kombi 7211-CeDeG can be used anywhere. Suction / release functions can also be implemented via a cordless remote control, which is especially recommended when transporting large dimension objects.

Use of 2-circuit technology means that the Battery-powered Vacuum Lifting Kombi 7211-CeDeG has two independent vacuum circuits. Each vacuum circuit is designed so that it can support the nominal load on its own, If one of the systems fails, or if there is a loss of power, you receive a warning.

This type of Vacuum Lifting Device can be used immediately with a crane or a fork-lift truck.