Battery-powered Vacuum Lifting Device Kombi 7211-ADS for construction site and workshop

You can move very long thin parts up to 240 kg at EC construction sites with the Battery-powered Vacuum Lifting Device Kombi 7211-ADS. The load can be turned through +/- 90 and or pivoted through 90 degrees. Turning and tilting are carried out manually. There are locking points every 15 degrees throughout the tilting range.

The Battery-powered Vacuum Lifting Device Kombi 7211-ADS has a 2-circuit vacuum system and was developed for construction site use in accordance with the safety standard EN 13155. Use of 2-circuit technology means that the Battery-powered Vacuum Lifting Kombi 7211-ADS has two independent vacuum circuits. Each vacuum circuit is designed so that it can support twice the nominal load on its own, If one of the systems fails, or if there is a loss of power, you receive a warning.

Simple swapping of the lower part means that the Battery-powered Vacuum Lifting Device Kombi 7211-DS can be converted at any time to a Battery-powered Vacuum Lifting Device Kombi 7211-DSG.

The battery-powered vacuum pump does not require a power supply, so that the Battery-powered Vacuum Lifting Device Kombi 7211-ADS can be used anywhere.

The vacuum/release function can also be initiated by a wireless remote control, which is particularly recommendable when transporting larger dimensions or using a forklift.

This type of Vacuum Lifting Device can be used immediately with a crane or a fork-lift truck.