The Vacuum Lifting Device Kombi 7231-CS for construction site and workshop
Lift, hold and move using the Vacuum Lifting Device Kombi 7231-CS, e.g. for glass, metal plates, plastic plates, etc.
Particularly geared to your requirements, this series can vertically and horizontally transport loads with a weight of up to 2000 kg and a size of up to 12000 x 3000 mm.
The Vacuum Lifting Device 7231-C-1000 has a 2-circuit vacuum system and was developed for construction site use in accordance with the safety standard EN 13155.
The suction cups are slidably mounted on the cross carrying bars, or the cross carrying bars are adjustably mounted on the longitudinal carrier pipe. An electric motor is used to pivot the load from the vertical to the horizontal and vice versa. All you need otherwise is a crane and a 400 V power supply.
Use of 2-circuit technology means that the Vacuum Lifting Device Kombi 7231-C-1000 has two independent vacuum circuits. Each vacuum circuit is designed so that it can support the nominal load of the Vacuum Lifting Device 7231-C-1000 on its own. If one of the systems fails, or if there is a loss of power, you receive a warning.
The modular design of the Vacumm Lifting Device 7231-C-1000 means that the vacuum generator can be changed over from mains electricity driven, to battery or compressed air driven.
The Vacuum Lifting Device 7231-C-1000 is and will remain adaptable to your requirements by its modular design.
Such a Vacuum Lifting Device can be used immediately with a crane.