Vacuum Lifter Kombi 7201-AB for production and workshop
The Vacuum Lifter Kombi 7201-AB allows you to move loads of up to 1500 kg. The product range has versions suitable for carrying plate material with dimensions up to 6000 x 3000 mm. The outer suction cups are extendable. All you need otherwise is a crane and a 230 or 400 V power supply.
An optional overpressure release function is provided, so that, firstly, the Kombi 7201-AB can be more easily positioned on the transported material and, secondly, more quickly sets it down.
An optional protection grating provides the operator with additional protection, e.g. against broken glass.
Additional supports guarantee the safe transport of freshly sealed insulation glass units. The height of the supports can be adjusted and they can be removed at any time if the Vacuum Lifting Device Kombi 7201-AB is required for another task.
The Vacumm Lifting Device Kombi 7201-AB has a 2-circuit vacuum system and was developed for construction site use in accordance with the safety standard EN 13155. Use of 2-circuit technology means that the unit has two independent vacuum circuits. Each vacuum circuit is designed so that it can support the nominal load on its own, If one of the systems fails, or if there is a loss of power, you receive a warning.
The modular design of the Line-powered Vacuum Lifting Device Kombi 7201-AB means that the vacuum generator can be changed over from line-powered to battery-powered or compressed air powered.
The Vacuum Lifting Device Kombi 7201-AB is and remains, due to its modular construction, adaptable to your requirements.
Such a Vacuum Lifting Device can be used immediately with a crane.