Vacuum Lifting Device Kombi 7001-ABs for production and workshop

The Vacuum Lifting Device Kombi 7001-ABs can be used to transport plate material with a weight of up to 1500 kg and dimensions up to 6000 x 3000 mm. The outer suction cups are lockable. All you need otherwise is a crane and a 230 or 400 V power supply.

The special design of the suspension permits laying of, for example, glass plates, horizontally on a cutting table or lifting of them away from the table.

An over-pressure release function is provided as an option to enable quick release and easy positioning of the unit.
An optional protection grating provides the operator with additional protection, e.g. against broken glass.

Additional supports guarantee the safe transport of freshly sealed insulation glass units. The height of the supports can be adjusted and they can be removed at any time if the Vacuum Lifting Device Kombi 7001-ABs is required for other duties.

The Vacuum Lifting Device Kombi 7001-ABs has a 1-circuit vacuum system.

If required, the Vacuum Lifting Device Kombi 7001-ABs is also available with 2-circuit technology as the Vacuum Lifting Device 7201-ABs. The Vacuum Lifting Device Kombi 7201-ABs has two independent vacuum circuits. Each vacuum circuit is designed so that it can support the nominal load on its own, If one of the systems fails, or if there is a loss of power, you receive a warning.

The modular design of the Vacuum Lifting Device Kombi 7001-ABs means that the vacuum generator can be changed over from mains electricity drive, to battery or compressed air drive.

The single circuit vacuum system can be replaced at any time with a twin circuit vacuum system. Upgrading to a Battery-powered Vacuum Lifting Device Kombi 7201-ABs is, therefore, always possible.

The Vacuum Lifting Device Kombi 7001-ABs is and remains, due to its modular construction, adaptable to your requirements.