Vacuum Lifting Device (Vacuum Lifter) Kombi 7001-A-H-1000 for production and workshop
Lift, hold and move using the Vacuum Lifting Device Kombi 7001-AH-1000, e.g. for pipe, metal strip, etc.
Particularly geared to your requirements, this series can horizontally transport loads with a weight of up to 1000 kg.
All you need otherwise is a crane and a 230 or 400 V power supply.
The Vacuum Lifting Device Kombi 7001-A-H-1000 has a 1-circuit vacuum system.
If required, the Vacuum Lifter Kombi 7001-A-H-1000 is also available with 2-circuit technology as the 7201-A-H-1000. Use of 2-circuit technology means that the Vacuum Lifting Kombi 7201-A-H-1000 has two independent vacuum circuits. Each vacuum circuit is designed so that it can support the nominal load on its own, If one of the systems fails, or if there is a loss of power, you receive a warning.
The suction cups are slidably mounted on the longitudinal carrying bar.
The modular design of the Vacuum Lifting Device Kombi 7001-A-H-1000 means that the vacuum generator can be changed over from mains electricity drive, to battery or compressed air drive.
The addition of cross carrying bars enables conversion of the Vacuum Lifting Device Kombi 7001-A-H-1000 into a Kombi 7001-C-H-1000 Vacuum Lifting Device, with which plate material, e.g. metal plates, can be horizontally transported.
The single circuit vacuum system can be replaced at any time with a twin circuit vacuum system. Upgrading to a Vacuum Lifting Device Kombi 7201-A-H-1000 is, therefore, possible at any time.
The Vacuum Lifting Device Kombi 7001-A-H-1000 is and remains, due to its modular construction, adaptable to your requirements.