Vakuum Lifter Kombi 7031-DSG3 for production and workshop

With the Vacuum Lifter Kombi 7031-DSG3 you can move convex and concave shaped materials up to 1000 kg, such as e.g. glass, sheet metals, plastic boards. The load can be turned through +/- 360 and or pivoted through 90 degrees.

The suction cup rows are mounted in a translational and rotatable manner, so that simple matching to the radius is possible. The minimum radius of the transported load is 1000 mm for this device. The device size can be adapted to the transported load by means of four extensions.

Electric motors are responsible for propulsion. Limiting of the turning movement is not provided. The load can be turned to the left or right through 360°. An electric motor is used to pivot the load from the vertical to the horizontal and vice versa. All you need otherwise is a crane and a 400 V power supply.

The Vacuum Lifting Device Kombi 7031-DSG3 has a 1-circuit vacuum system.

If required, the Vacuum Lifting Device 7031-DSG3 is also available with 2-circuit technology as the Vacuum Lifting Device 7231-DSG3. The Vacuum Lifting Device 7231-DSG3 has two independent vacuum circuits. Each vacuum circuit is designed so that it can support the nominal load on its own, If one of the systems fails, or if there is a loss of power, you receive a warning.

Such a Vacuum Lifting Device can be used immediately with a crane.