References
Pannkoke Flachglastechnik GmbH
plate glass carriage 496-120
Dear Mr. Pannkoke,
We’ve now had the opportunity to try out the new glass carrier a number of times, and I’m happy to say that it has worked exactly as we imagined it would.
Germany
The heaviest pane that we have moved until now weighed 593 kg and measured 316.0 x 358.0 cm.
I’ve taken the liberty of enclosing a couple of pictures of glazing work we’ve performed with the carrier.
The carrier has turned out to be ideal both for transporting glass and for holding it temporarily when doing crane-based installation work.
The only things we would suggest changing are: Using rubber as a contact surface and implementing some sort of securing mechanism for the lashing straps (they are excellent, but we are using them for something else right now).
Sincerely,
Marc Hauswald
The ISO-Gabel in use in the insulation glass production
August 2008
Germany
The manipulation device 7025-MDmS4/E in use in the Isolette production
August 2008
Germany
Click on Manipulation device 7025-MDmS4/E to view more details on this device.
The manipulation device 7025-MS4/E in use in the insulation glass production
August 2008
Germany
Click on Manipulation device 7025-MS4/E to view more details on this device.
The Manipulation device 7025-MD4/E in use in the insulation glass production
August 2008
Germany
Click on Manipulation device 7025-MD4/E to view more details on this device.
The manipulation device 7025-MD2/E in use in the insulation glass production
August 2008
Germany
Click on Manipulation device 7025-MD2/E to view more details on this device.
The manipulation device 7025-MD2/E in use in the insulation glass production
August 2008
Germany
Click on Manipulation device 7025-MD2/E to view more details on this device.
Manipulation device 7025-GG SO01 in use for the production of silo wagons
November 1999
Germany
Vacuum lifting device Kombi 7441-DmS3H being used on the construction site of Moet et Chandon
Use of a vacuum lifter Kombi 7441-DmS3H on the construction site for the new production facilities of Moet et Chandon. This glass pane has a dimension of approx. 4500 x 1500 mm and a weight of approx. 800 kg. The glazing processing has been carried out by Fermeture du Nord Est EURL from Aiglement / France.
June 2013
France
You can obtain more information for this vacuum lifter Kombi 7411-DmS3H with a click.
Vacuum lifting device Kombi 7411-DS7Z in use
The company Nordmarkens Fasader AB from Töcksfors / Schweden also trusts the vacuum sucker Kombi 7411-DS7Z.
Nordmarkens Fasader AB
Sweden
If you want more information about this device line, then click on the vacuum lifting device Kombi 7411-DS7Z here.
Glazing work using the Kombi 7411-CeDe
This insulating glass pane was installed by Glas-Marte Beteiligung GmbH
November 2006
Austria
Click on vacuum lifting device Kombi 7411-CeDe to view more details about this device.
Vacuum lifting device Kombi 7241-W600GG in use
Further to a request from GGR-UNIC, Oldham / Great Britain, the special vacuum lifting device Kombi 7241-W600GG was developed. Further to a request from GGR-UNIC, Oldham / Great Britain, the special vacuum lifting device Kombi 7241-W600GG was developed.
July 2014
Great Britain
This is achieved by the integrated counterweight.
Here are the first photographs of the Kombi 7241-W600GG vacuum lifter in operation.
The response to the question about what the device was like to work with was this: „it worked perfectly”
Would you like more information about this vacuum lifter? Then click here on vacuum lifting device Kombi 7241-W600GG.
Glazing work using the Kombi 7211-CeDe and Kombi 7211-VT on the control tower of the Erdinger Moos Airport in Munich
This insulating glass pane measuring 5.2 x 2.2m made of laminated safety glass VSG16 with solar protection SZR16 was manufactured and installed by Glas Zange GmbH & Co. KG
April 2003
Germany
Click on vacuum lifting device Kombi 7211-CeDe to view more details about this device.
Click on vacuum lifting device Kombi 7211-VT to view more details about this device.
You will find an application report in our News-Archive (1 ).
Click on Glas Zange GmbH & Co. KG to find out more about this company.
The Kombi 7211-DS3 in use at the Dutch company of Montage van der Linde b.v.
October 2006
Netherlands
Click on vacuum lifting device Kombi 7211-DS3 to view more details about this device.
You will find application reports in our News-Archive ( 1 / 2 / 3).
The best device for glazing work on construction sites is the Kombi 7211-DS3
Here in use during work by Koenig Glasbau GmbH & Co. KG
March 2005
Germany
Click on Kombi vacuum lifting device Kombi 7211-DS3 to view more details about this device.
You will find application reports in our News-Archive ( 1 / 2 / 3).
Vacuum lifting device Kombi 7211-DS4 in use
The Dutch company Montage van der Linde b.v. aus Leimuiden (Netherlands) also places its confidence in the Kombi 7211-DS4 suction lifter.
January 2014
Netherlands
If you want more information about this vacuum lifter line, then click on the vacuum lifting device Kombi 7211-DS4 here.
Vacuum Lifting Device Kombi 7211-DS4 in use
Transportbedrijf Balvert & Zn. B.V. from Nieuwveen / Netherlands also places its confidence in the Kombi 7211-DS4 suction lifter.
October 2012
Netherlands
If you want more information about this vacuum lifter line, then click on the vacuum lifting device Kombi 7211-DS4 here.
Application of the vacuum lifting device Kombi 7211-DS4 in Travemünde
This work was carried out by Glas Böttcher
September 2008
Germany
Click on vacuum lifting device Kombi 7211-DS4 to view more details about this device.
Metallbau Wendelstorf Verwaltungsgesellschaft mbH
This work was carried out by Metallbau Wendelstorf Verwaltungsgesellschaft mbH
March 2007
Germany
Click on vacuum lifting device Kombi 7211-DS2 to view more details about this device.
Glazing work on curved panes using Kombi 7211-CeDeG on an office building in Munich
A 2-circuit vacuum lifter was required by Glas Zange GmbH & Co. KG
August 2007
Germany
To carry out glazing work on these curved 12mm laminated safety glass panes with a minimum radius of 720cm.
Click on vacuum lifting device Kombi 7211-CeDeG to view more details about this device.
You will find an application report in our News-Archive (1 ).
Click on Glas Zange GmbH & Co. KG to find out more about this company.
Glazing work using the Kombi 7211-CeDe and Kombi 7211-VT on the control tower of the Erdinger Moos Airport in Munich
This insulating glass pane measuring 5.2 x 2.2m made of laminated safety glass VSG16 with solar protection SZR16 was manufactured and installed by Glas Zange GmbH & Co. KG
April 2003
Germany
Click on vacuum lifting device Kombi 7211-CeDe to view more details about this device.
Click on vacuum lifting device Kombi 7211-VT to view more details about this device.
You will find an application report in our News-Archive (1 ).
Click on Glas Zange GmbH & Co. KG to find out more about this company.
New curtain-wall technology from RP Technik is put in place using a Pannkoke vacuum lifting device
The Kombi 7201-HVSO was designed to install the ultra large curtain-wall elements measuring 12 x 5m for RP-Technik GmbH
June 2002
Germany
You will find an application report in our News-Archive (1 )
Giant insulating glass pane for the Pforzheim Schmuckmuseum (jewellery museum)
This 9m insulating glass pane was manufactured and installed by Henze-Glas GmbH
March 2006
Germany
Click on vacuum lifting device Kombi 7201-CeDe to view more details about this device.
You will find application reports in our News-Archive ( 1 / 2 / 3 ).
Special use of the vacuum lifting device Balance in a Frankfurt office building
The Balance vacuum lifting device was used by Normbau Weitz GmbH & Co. KG
June 2002
Germany
To remove and carry away the large insulating glass panes on an office building in Frankfurt.
Click on Balance vacuum lifting device to view more details on this device.
You will find application reports in our News-Archive (1 / 2 / 3).
The window elements weighing 600kg are installed on the new ALTANA building in Bad Homburg using the Balance.
The window elements were installed under a roof overhang measuring 1.5m deep by Schindler GmbH + Co. Fenster-Fassaden-Innenausbau KG
June 2002
Germany
Selected the Balance Vacuum Unit.
Click on Balance vacuum lifting device to view more details on this device.
You will find application reports in our News-Archive (1 / 2 / 3)
Use of Balance vacuum lifting device at Humboldt University in Berlin
This work was carried out by Bayer Glasbau GmbH
November 2001
Germany
Click on Balance vacuum lifting device to view more details on this device.
Click on Balance vacuum lifting device to read a report on this building project.
You will find application reports in our News-Archive (1 / 2 / 3).
The curtain walling element were mounted on the Deichtor Center in Hamburg using the Kombi 7011-DS.
The curtain walling elements were mounted by Steelwork GmbH
February 2002
Germany
Click on vacuum lifting device Kombi 7011-DS to view more details about this device.
You will find application reports in our News-Archive (1 / 2)
Use of the Kombi 7011-DS with extensions on the Deichtor Center in Hamburg
By adding extensions to the Kombi 7011-DS, it was possible to transport even large panes, as here used by Roschmann Glas GmbH & Co. KG.
February 2002
Germany
Click on Kombi vacuum lifting device Kombi 7011-DS to view more details about this device.
You will find application reports in our News-Archive (1 / 2).
The Kombi 7011-DS in use at the Dutch company of Montage van der Linde b.v.
Click on Kombi vacuum lifting device Kombi 7011-DS to view more details about this device.
You will find application reports in our News-Archive (1 / 2).
October 2003
Netherlands
Use of Kombi 7011-DS on a mini crane
You can hire or even purchase such a device from GGR-UNIC
March 2005
England
Click on vakuum lifting device Kombi 7011-DS to view more details about this device.
You will find application reports in our News-Archive (1 / 2).
Specialist for glazing in Japan
Click on vacuum lifting device Kombi 7011- D SO05 to view more details about this device.
March 2004
Japan
10,000m² of profile glass were installed on the multi-storey garage at the Rebstockpark in Frankfurt
Click on vacuum lifting device Kombi 7011-CX SO01 to view more details about this device.
You will find an application report in our News-Archive (1).
September 2000
Germany
The Kombi 7011-CeDe in use at the Dutch company of Montage van der Linde b.v.
Click on Kombi vacuum lifting device Kombi 7011-CeDe to view more details about this device.
October 2005
Netherlands
Installation work at Luxembourg Airport
Click on vacuum lifting device Kombi 7011-CeDe to view more details about this device.
November 2005
Germany
Use of a Kombi 7011-AL at City Glass in Russia
March 2005
Russia
The Kombi 8001-H2000 in use for cutting aluminium
Click on Kombi 8001-H2000 to view more details on this device.
August 2008
Germany
Window elements for the new building of the Internal Medicine Clinic of the University of Würzburg
These window elements were manufactured and installed by IGM GmbH
March 2006
Germany
Click on vacuum lifting device Balance 2KS to view more details on this device.
You will find application reports in our News-Archive (1 / 2).
The Venturi device 7005-VT/E in use in glass cutting
Click on Venturi device 7005-VT/E to view more details on this device.
August 2008
Germany
Special Venturi Device 7005-SO96/E in Minibus assembly
The Venturi Device is used for assembling large windscreens and heavy side windows at
since June 2007
Germany
The Venturi device 7005-AB/E in use in glass cutting
Click on Venturi device 7005-AB/E to view more details on this device.
August 2008
Germany
